 |
 |
|
Domo IP Hikvision DS-2CD793PF-E CCD 1/3" 704x576 25fps H264 2.8-11mm 0.02Lux SD POE antivandálica

NOTA: Este producto suele traerse unicamente bajo pedido, por lo que es probable que no este fisicamente en stock en tienda. Para asegurar plazo de entrega recomendamos contactar con nosotros previamente por email o telefono.
Key Features:
• Real time video at 4CIF resolution
• H.264/MPEG4/MJPEG video compression
• Up to 32 GB SD/SDHC card local storage
• Two-way audio
• PoE
• Compatible with ONVIF & PSIA standard
Para mas informacion sobre el producto, podeis bajaros los siguientes PDFs:
- Folleto técnico del producto (0.3Mb)
Web del fabricante:
- DS-2CD793PF-E
|
|
 |
 |
| Camera |
| Image Sensor: |
1/3" SONY CCD
|
| Signal System: |
PAL/NTSC
|
| Min. Illumination: |
0.02Lux @ F1.2, 0.027Lux@ F1.4
|
| Shutter time: |
1/25(1/30)s ~1/100,000s
|
| Lens: |
2.8-11mm @ F1.4
|
| Lens Mount: |
f14
|
| Auto Iris: |
DC drive
|
| Day& Night: |
Electronic
|
| Angle of view: |
97°~24°
|
| Adjustment Range: |
Pan0~360°, Tilt0~75°, Rotation0~360°
|
|
| Compression Standard |
| Video Compression: |
H.264 / MPEG4 / MJPEG
|
| Bit Rate: |
32 Kbps~8Mbps
|
| Audio Compression: |
G.711
|
| Dual Stream: |
Yes
|
|
| Image |
| Max. Image Resolution: |
PAL:704x576;NTSC:704x480
|
| Frame Rate: |
50HZ: 25fps (704×576) 60HZ: 30fps (704×480)
|
|
| Network |
| Alarm Trigger: |
Motion Detection, Network Disconnect, IP address conflict, Storage exception
|
| Protocols: |
TCP/IP,HTTP,DHCP,DNS,DDNS,RTP/RTSP, PPPoE, SMTP, NTP(SNMP,HTTPS, FTP,SIP,802.1x, IPv6 optional)
|
| Motion Detection: |
Support
|
| Password Protection: |
Support
|
| HeartBeat: |
Support
|
|
| Interface |
| Audio Input: |
1-ch microphone input, 3.5mm mini-jack
|
| Audio Output: |
1-ch 3.5mm audio interface (line level, 600 O)
|
| Communication Interface: |
1 RJ45 10M / 100M ethernet interface, 1 RS-485 interface
|
| Alarm Input: |
2 channel
|
| Alarm Output: |
2 channel
|
| Video Output: |
1Vp-p Composite Output(75Ohm, RCA)
|
| Reset Button: |
Yes
|
|
| General |
| Power Supply: |
12 VDC ± 10%, PoE (802.3af)
|
| Power Consumption: |
5.5W MAX
|
| Working Temperature: |
-10°C~60°C(14°F~140°F)
|
| Working Humidity: |
90% or less
|
| Impact Protection: |
IEC60068-275Eh, 50J; EN50102, exceeding IK10
|
| Dimensions: |
F140×114mm (f5.51"×4.49")
|
| Weight: |
1400g (3.08lbs)
|
|
|
|
|